What's New List Serve Post Display

Welcome to the California Air Resources Board Enforcement
Division's Training Listserv. You are receiving this message
because you have previously signed up for our training Listserv
or you have previously attended one of our training courses. By
subscribing to our Listserv you will receive announcements of new
training courses as well as a monthly calendar of all the
training courses offered.

If you would like to be removed from this listserv please follow
this link:

http://www.arb.ca.gov/listserv/listserv.php

List of Upcoming Classes:
04/14/2009
Sacramento
Course 340: Gasoline Facilities Phase I and II Seminar
http://www.arb.ca.gov/training/courses.php?course=340
This three-day seminar presents a complete overview of the
gasoline vapor recovery program. The history, certification and
testing requirements, Executive Orders, types of vapor recovery
systems and equipment, installation and compliance inspections,
compliance test procedures, and Enhanced Vapor Recovery are
discussed.

04/15/2009
Calabasas
Course 375: Smoke Management Training Workshop
http://www.arb.ca.gov/training/courses.php?course=375
This two-day Workshop will emphasize the importance of proper
smoke management and its impact on dispersion. Speakers will
include representatives of CARB, EPA Region IX, air pollution
control districts, and National Parks and Forest Service.

04/16/2009
South Coast AQMD
Course 290.5: Misc Metal Parts & Products Surface Coating
NESHAP
http://www.arb.ca.gov/training/courses.php?course=290.5
The National Emissions Standards for Hazardous Air Pollutants
(NESHAP) for Miscellaneous Metal Parts and Products Surface
Coating (MMMM) is a complex air rule that affected about 5,000
facilities nationwide, from large metal coating operations to
small job shops, beginning in January 2007.

This 1-day training will provide inspectors, permit writers, and
regulatory personnel with practical information and tools to
allow them to evaluate and/or assist NESHAP compliance.

04/17/2009
South Coast AQMD
Course 290.6: Plastic Parts and Products Surface Coating NESHAP
http://www.arb.ca.gov/training/courses.php?course=290.6
The National Emissions Standards for Hazardous Air Pollutants
(NESHAP) for Plastic Parts and Products Surface Coating (PPPP) is
a complex air rule that affected about 1,100 facilities
nationwide, from large plastic coating operations to small job
shops, beginning in April 2007.

This 1-day training will provide inspectors, permit writers, and
regulatory personnel with practical information and tools to
allow them to evaluate and/or assist NESHAP compliance.

04/17/2009
SCAQMD
Course 395: Fugitive Emissions Operator Training
http://www.arb.ca.gov/training/courses.php?course=395
This one-day course provides training in fugitive emissions
monitoring procedures for technical field staff at refineries,
marketing terminals, and oil and gas production facilities.
Topics covered include: component identification and counting;
performance quality assurance for portable hydrocarbon analyzers;
preparing portable hydrocarbon analyzers for field use; component
screening procedures; factors affecting accuracy of measurements;
and emissions inventory overview.

04/21/2009
San Luis Obispo
Course 100: Fundamentals of Enforcement
http://www.arb.ca.gov/training/courses.php?course=100
This three-day course is a basic overview of air pollution
emphasizing visible emissions evaluation. Participants will be
trained to perform EPA Method 9 for reading visible emissions and
will have the opportunity to obtain visible emissions evaluation
certification.

04/21/2009
Bakersfield
Course 502: Portable Equipment ATCM
http://www.arb.ca.gov/training/courses.php?course=502
This one-day course is designed for both environmental
regulators and the public and is designed to provide information
on the following:

    1) What is PERP?
    2) Legislative history and rule development
    3) Eligibility requirements for both engines and equipment
units
    4) PERP requirements - indentification, notification
bookkeeping, etc
    5) ATCM requirements
    6) Inspection requirements

. .

04/21/2009
Bay Area
Course 290.3: Equiv. MACT, Chrome Plating & Anodizing
http://www.arb.ca.gov/training/courses.php?course=290.3
This one-day course is designed for both environmental
regulators who are interested in enforcing regulations involved
with the chrome plating industry. This course also satisfies the
“training” requirements for owner/operators pursuant to section
93102.

04/22/2009
Fresno
Course 502: Portable Equipment ATCM
http://www.arb.ca.gov/training/courses.php?course=502
This one-day course is designed for both environmental
regulators and the public and is designed to provide information
on the following:

    1) What is PERP?
    2) Legislative history and rule development
    3) Eligibility requirements for both engines and equipment
units
    4) PERP requirements - indentification, notification
bookkeeping, etc
    5) ATCM requirements
    6) Inspection requirements

. .

04/22/2009
San Francisco - By Invitation Only
Course 230.3: Metal Container, Closure & Coil Coating
http://www.arb.ca.gov/training/courses.php?course=230.3
This one-day course will review the steps to manufacture
two-piece aluminum and three-piece steel cans, as well as the
chemical and physical demands on coatings for the metal packaging
industry. The extensive testing required for the Food and Drug
Administration, as well as taste and product coating
compatibility will have serious ramifications on one's choice of
coatings.

04/22/2009
San Francisco - By Invitation Only
Course 290.3: Equiv. MACT, Chrome Plating & Anodizing
http://www.arb.ca.gov/training/courses.php?course=290.3
This one-day course is designed for both environmental
regulators who are interested in enforcing regulations involved
with the chrome plating industry. This course also satisfies the
“training” requirements for owner/operators pursuant to section
93102.

05/05/2009
Garberville
Course 322: Adv. Variance/Hearing Board Workshop
http://www.arb.ca.gov/training/courses.php?course=322
The Advanced Course is a two day, 16-hour course which focuses
on the more technical issues, ARB legal and enforcement insight,
and particularly difficult scenarios. This course is designed for
experienced hearing board members and is taught by ARB
Enforcement staff, attorneys, and veteran hearing board members.

05/06/2009
Bay Area
Course 511: Diesel Partiulate Filters
http://www.arb.ca.gov/training/courses.php?course=511
Diesel particulate filter (DPF) is well known and widely used as
an effective control of diesel en-gine exhaust. This one-day
course will present the use of DPF as both a stationary and
mobile source diesel particulate control device.

05/07/2009
Bay Area
Course 511: Diesel Partiulate Filters
http://www.arb.ca.gov/training/courses.php?course=511
Diesel particulate filter (DPF) is well known and widely used as
an effective control of diesel en-gine exhaust. This one-day
course will present the use of DPF as both a stationary and
mobile source diesel particulate control device.